The Process 134 is what we’d consider a bit of a classic bike. It’s well-loved by both Kona and our customers so we’re keeping it rolling. Affordability and durability make the 140mm travel Process 134 a special blend. It’s got just enough travel to be stout enough to ride in a wide variety of terrain, while still having the playful snappy feel the Process line is known for. Key Features:Kona 6061 Aluminium – Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. .Internal Headset – Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible..Tapered Head Tube – More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed..12x142mm Axle – 12x142mm, 12×148 and 12×157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you’ll see the 12×148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12×142 thru-axle..Rocker Independent Suspension – With the Rocker Independent Suspension, we set out to design a platform that was as compact and low-slung on the frame as possible for maximum standover, stiffness and manoeuvrability. Exclusively found on our Process line of bikes, we built an efficient pedalling platform with a consistent leverage rate curve that perfectly matches modern air shocks and provides a predictable feel throughout the travel. All this translates into a capable climber that is insanely confident with the plush downhill performance.27.5″ Wheels – The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more manoeuvrable and nimble than 29-inch ones. .