Specialized Stumpjumper EVO Elite Alloy 29″ Mountain Bike 2022 Designed to beast all manner of trails, the Specialized Stumpjumper EVO Elite Alloy 29″ Mountain Bike is built around a lightweight, robust and responsive M5 aluminium frame that makes any ride come alive when the power is laid down. The frame integrates a rear suspension format comprising a FOX FLOAT X Factory, Rx Trail Tune damping unit with 150mm of travel, sophisticated kinematics and a refined leverage rate. These attributes combine to ensure sensitivity over ripples, mid-stroke support and bags of compliance over the big hits. Additionally, the advanced rear suspension design possesses excellent anti-squat characteristics to better resist bob under extreme pedalling loads. A FOX FLOAT Factory fork is combined with the frame and provides generous amounts of smooth travel to soak up the harshest obstacles when travelling at full pace. A long, low, and slack geometry with a short fork offset and a steeper headtube angle positions the rider perfectly for modern trail riding demands. This geometry can be finely tuned via the three-position headset cup that alters the head angle and the horst link chip that raises or lowers the bottom bracket by 10mm. In addition, an aftermarket MulletLink can be installed to allow a 27.5” rear wheel to be installed. Burly alloy wheels are reactive, nimble and rugged and are driven by the smooth-shifting, wide-ranging SRAM GX Eagle 12-speed gears. Composed stopping power in all conditions is generated by the hydraulic disc brakes and 200mm rotors, while a dropper seatpost gets the saddle out of the way during the quickest, most technical descents. Highlights A hardy, robust and lively trail bike best suited to the most demanding sessions A lightweight but tough M5 alloy frame provides a responsive pedalling platform and can more than handle a rugged off road life The frame integrates a plush FOX FLOAT X Factory, Rx Trail Tune rear damping unit with 150mm of travel The frame’s rear suspension kinematics and leverage rate affords small bump sensitivity, mid-stroke support, and compliant but controlled full travel over the big hits Excellent anti-squat characteristics means the rear suspension format better resists pedal bob when under power A FOX FLOAT 36 Factory fork grants 150mm or 160mm of suspension (depending on frame size) to take the sting out of the largest obstacles on course The geometry is long, low, and slack with a short offset fork and a steeper seat tube angle; perfect for modern progressive trail riding Geometry fine tuning is possible via the three position headset cup that alters the head angle and the horst link chips that change the bottom bracket height by 10mm An aftermarket MulletLink is available separately to allow a 27.5” rear wheel to be used Burly alloy wheels deliver maximum reactivity, nimble direction changes and devour square edge hits SRAM's GX Eagle 12-speed gear setup offers a huge range and incredibly accurate shifting performance 4-piston hydraulic disc brakes and 200mm rotors improve stopping power and precision in all conditions A OneUp dropper seatpost gets the saddle out of the way when the trails are fast and technical
This mountain bike is available today at Sigma Sports.